32mm Rebar Cnc Hook Bending Machine Rebar Bender Double Head Beder 380V/440/220V
Dec 24, 2021| Overview
The vertical CNC steel bar bending center can be used in the construction of high-speed, road and bridge, house construction projects. The raw material is 10-32mm bar material. It can process a variety of graphics. It adopts PLC control. The processing accuracy can be controlled within ±2mm. Intelligent CNC Operation reduces labor intensity and labor cost. The system can store 100 shapes, which can be called during processing.
Scope of application
Mainly used in the construction of high-speed, road and bridge, housing construction, railway and other projects.
Device parameters
| rated power | 18KW | |||||||||
| Air source working pressure | 0.8MPa | |||||||||
| Maximum bending angle | -120 degree 至180 degree | |||||||||
| Maximum bending angle | 10.8m | |||||||||
| Minimum curved edge spacing | 750mm | |||||||||
| Moving speed of machine head | 0.5-1m/sec | |||||||||
| Fastest bending speed | 72 degree /sec | |||||||||
| total weight | 4.8t | |||||||||
| Average power consumption | 5KW/H | |||||||||
| LWH | 12m2m1.6m | |||||||||
| Diameter | 10 | 12 | 14 | 16 | 20 | 22 | 25 | 28 | 32 | |
| Quantity | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 1 | 1 | ± Less than or equal to 90 degree |
| Movement Control | Servo | |||||||||
| Bending Control | Servo | |||||||||
| Power source | pneumatic | |||||||||
Equipment advantages
The forming wheel can be customized to bend complex steel bar patterns.
The all-steel welded box body is strong, durable, and will not deform for life.
Using rack drive to ensure accurate product size.
The bending and walking are all controlled by servo motors, the bending angle is accurate, and the forming size is accurate.
Case
Our factory
Our service
Certification
